•  8 * 3.2V 135Ah LiFePO4 Prismatic Battery Cell
•  1 * 12V 100A 4S Seplos Smart BMS
•  1 * Battery Case
•  1 * Capacity Indicator
•  1 * BMS Wire for Capacity Indicator
•  1 * BMS Wire for Power Switch
•  1 * BMS Wire for Battery Monitoring
• 10 * EVA Foam Tape
•  1 * Copper Bus Bars 
•  8 * Aluminum Bus Bars
•  2 * Epoxy Fiberglass A
•  4 * Epoxy Fiberglass B
•  4 * Epoxy Fiberglass C
•  1 * 58V 150A Fuse 
•  2 * 111*69mm handle
•  2 * 100A Battery Terminal Black/Red Screws 

Feature:

• Nominal Voltage: 12.8V 
• Nominal Capacity: 270Ah
• Cell Configuration: 4S2P
• Dimension:460*300*185mm

Benefits:

• Easy Assembly with detailed installation guides, accessible to everyone.
• Simplified maintenance, if a cell is out of service, it is possible to replace the cell without changing the complete pack. 
• Lithium iron has a lifespan of 6000+ charge cycles.
• Especially suitable for home storage, boat, van, vehicles, solar installation, etc.
• The installation manual and wiring diagram are provided when purchasing the kits. 

Precautions:

• The battery pack should be stored in a dry and ventilated place. The operating temperature is between -20℃ - 60℃.
• The positive and negative metal terminals must be protected in order to avoid a short circuit due to a falling metal object on the pack. 
• The components on the BMS should be protected in order to avoid any damages due to a falling metal object on the surface of the BMS board. 

This Seplos lithium phosphate battery pack designed by Seplos technology will suitable for multi-brands of inverters as below:

Application: