- 8 * 3.2V 135Ah LiFePO4 Prismatic Battery Cell
- 1 * 24V 100A 8S BMS
- 1 * Battery Case
- 1 * Capacity Indicator
- 1 * BMS Wire for Capacity Indicator
- 1 * BMS Wire for Power Switch
- 1 * BMS Wire for Battery Monitoring
- 10 * EVA Foam Tape
- 1 * Copper Bus Bars
- 8 * Aluminum Bus Bars
- 2 * Epoxy Fiberglass A
- 4 * Epoxy Fiberglass B
- 4 * Epoxy Fiberglass C
- 1 * 58V 150A Fuse
- 2 * 111*69mm handle
- 2 * 100A Battery Terminal Black/Red
Nominal Voltage: 25.6V
Nominal Capacity: 135Ah
Cell Configuration: 8S
Easy Assembly with detailed installation guides, accessible to everyone.
Simplified maintenance, if a cell is out of service, it is possible to replace the cell without changing the complete pack.
Lithium iron has a lifespan of 6000+ charge cycles.
Especially suitable for home storage, boat, van, vehicles, solar installation, etc.
The installation manual and wiring diagram are provided when purchasing the kits.
The battery pack should be stored in a dry and ventilated place. The operating temperature is between -20℃ - 60℃.
The positive and negative metal terminals must be protected in order to avoid a short circuit due to a falling metal object on the pack.
The components on the BMS should be protected in order to avoid any damages due to a falling metal object on the surface of the BMS board.