The Seplos SP-HV-18S is a high-voltage battery management solution integrating a Battery Control Unit (BCU), Battery Monitoring Unit (BMU) and intelligent cooling fan control. The BCU can support high-voltage battery systems while providing protection against overcharge, over-discharge, overcurrent, high temperature and low temperature conditions.
The BMU performs precise real-time sampling of individual cell voltage and temperature and supports 4–18 cell nodes. CAN and RS485 communication allow battery data to be transmitted to the BCU, while passive balancing, fan control and fault detection help improve battery consistency, thermal management and system reliability.
Battery Protection
Multi-level protection helps protect the battery system from overcharge, over-discharge, overcurrent and abnormal temperature conditions.
Precision Cell Monitoring
Real-time cell voltage and temperature sampling supports accurate battery status monitoring and fault detection.
CAN & RS485 Communication
Isolated CAN and RS485 interfaces enable reliable real-time communication between the BMU, BCU and compatible system controls.
Balancing & Thermal Control
Up to 200mA passive balancing combines with intelligent fan control and PWM speed regulation for improved cell consistency and thermal management.
Review the key electrical, environmental and communication parameters before confirming battery configuration and system compatibility.
Use these values for preliminary battery pack, inverter and current matching before final technical confirmation.
| Parameter | Specification |
|---|---|
| Supported System Voltage | < 1500V |
| BMU Supply Voltage | 12V / 24V (12–30V) |
| Rated Power Consumption | < 3W |
| Static Power Consumption | < 100μA |
| Cell Voltage Sampling Range | 0–5V |
| Voltage Sampling Accuracy | < 15mV (-40°C to 125°C) |
| Cell Nodes | 4–18 |
| Temperature Sampling Range | -40°C to 125°C |
| Temperature Accuracy | ±2°C |
| Sampling Period | 200ms |
| Temperature Channels | 9 |
| CAN Communication | 125–1000kbps; Default 250kbps |
| RS485 Communication | 9600–115200bps; Default 9600bps |
| Fan Supply Voltage | 12V / 24V |
| Fan Drive Power | ≤10W |
| Fan ON Temperature | Cell 40°C / Terminal 85°C |
| Fan OFF Temperature | Cell 35°C / Terminal 75°C |
| Balancing | Passive Balancing / 200mA |
| Automatic Coding | Supported / With Coding Wire |
| Working Temperature | -40°C to 85°C |
| Working Humidity | 5–90% |
Check battery chemistry, series configuration, current requirements and communication compatibility before confirming your BMS selection.
Use the core product data below as a quick matching reference. Final compatibility should be confirmed against your battery pack and inverter requirements.
Share your battery chemistry, series configuration, nominal voltage, maximum current and inverter model. Our technical team can help confirm BMS compatibility before ordering.
Your project information will only be used to evaluate your inquiry and provide relevant product or technical support.