The Seplos B-48100-B BMS 3.0 Type B is designed for 48V lithium battery packs requiring 100A continuous charge and discharge capability. It supports 15S and 16S LiFePO4 configurations as well as 13S and 14S NCM battery systems, making it suitable for different lithium battery architectures used in residential and solar energy storage.
The Type B architecture uses separated communication and status-light modules for flexible system installation. Accurate SOC calculation, independent chip sampling, passive balancing, 10A current limitation and Bluetooth monitoring help improve battery safety, cell consistency and system visibility.
Comprehensive Battery Protection
Intelligent battery protection helps manage abnormal voltage, current and temperature conditions for safer 48V lithium battery operation.
Smart Battery Monitoring
Bluetooth monitoring and accurate SOC calculation provide convenient visibility into battery status, remaining capacity and operating conditions.
CAN & RS485 Communication
CAN and RS485 communication interfaces support reliable connection with compatible inverters and energy storage system controls.
Cell Balancing Support
Passive balancing helps maintain cell consistency, while built-in dry-contact control supports integration with a compatible external active balancer.
Review the key electrical, environmental and communication parameters before confirming battery configuration and system compatibility.
Use these values for preliminary battery pack, inverter and current matching before final technical confirmation.
| Parameter | Specification |
|---|---|
| Model | B-48100-B |
| BMS Version | BMS 3.0 Type B |
| Nominal System Voltage | 48V |
| Battery Chemistry | LiFePO4 / NCM |
| LFP Configuration | 15S / 16S |
| NCM Configuration | 13S / 14S |
| Working Voltage Range | 40V – 59V |
| Charge Voltage Range | 48V – 60V |
| Typical Charge Voltage | 54V |
| Rated Charge / Discharge Current | 100A |
| Maximum Charge / Discharge Current | 110A |
| Current Limitation | 10A |
| Communication | CAN / RS485 ×2 |
| Monitoring | Bluetooth |
| Balancing | Passive Balancing |
| Maximum Passive Balance Current | 150mA |
| SOC Calculation | Supported |
| Active Balancer Control | Dry Contact Supported |
| Internal Resistance | < 2mΩ |
| Pre-Charge | 0–3000ms |
| Working Temperature | -20°C – 70°C |
| Storage Temperature | -40°C – 85°C |
| Ambient Humidity | 10% – 85% |
Check battery chemistry, series configuration, current requirements and communication compatibility before confirming your BMS selection.
Use the core product data below as a quick matching reference. Final compatibility should be confirmed against your battery pack and inverter requirements.
Share your battery chemistry, series configuration, nominal voltage, maximum current and inverter model. Our technical team can help confirm BMS compatibility before ordering.
Your project information will only be used to evaluate your inquiry and provide relevant product or technical support.