BMS

Seplos BMS 3.0-A 48V 200A LiFePO4 Smart BMS

Integrated Smart BMS for 48V Lithium Battery Systems

The Seplos B-48200-A BMS 3.0 Type A is a 48V 200A smart battery management system for LiFePO4 and NCM battery packs, integrating CAN/RS485 communication, Bluetooth monitoring, passive balancing, SOC calculation and intelligent battery protection.
Model
B-48200-A
Chemistry
LiFePO4 / NCM
200A

Rated Current

16S LFP / 14S NCM

Battery Configuration

LiFePO4 / NCM

Battery Chemistry

CAN / RS485

Communication

PRODUCT OVERVIEW

Smart Protection, Monitoring & Battery Control

Designed for high-current 48V lithium battery systems, the Seplos BMS 3.0 Type A combines intelligent protection, monitoring, balancing and inverter communication in an integrated board design.

Built for High-Current 48V Lithium Battery Systems

The Seplos B-48200-A BMS 3.0 Type A is designed for 48V lithium battery packs requiring up to 200A typical charge and discharge current. It supports 16S LiFePO4 and 14S NCM battery configurations, providing a flexible battery management platform for residential and solar energy storage applications.

Unlike the Type B and Type C layouts, Type A integrates the communication ports and status indicators directly onto the main BMS board. Accurate SOC calculation, independent chip sampling, passive balancing, 10A current limitation and Bluetooth monitoring help improve battery safety, cell consistency and system visibility.

Integrated Type A Board Design
Communication ports and status indicators are integrated directly onto the main BMS board for a compact installation, with CAN/RS485 inverter communication and dry-contact active-balancer control.
CORE FEATURES

Comprehensive Battery Protection

Intelligent protection supports reliable high-current operation while helping protect the battery pack from abnormal voltage, current and temperature conditions.

Smart Battery Monitoring

Bluetooth monitoring and accurate SOC calculation provide convenient visibility into battery status and remaining capacity.

CAN & RS485 Communication

Dual CAN/RS485 inverter communication interfaces support integration with compatible inverters and energy storage systems.

Balancing Support

Passive balancing helps improve cell consistency, while the built-in dry contact can control a compatible external active balancer when greater balancing capability is required.

TECHNICAL SPECIFICATIONS

Technical Data for BMS Evaluation

Review the key electrical, environmental and communication parameters before confirming battery configuration and system compatibility.

B-48200-A

Core BMS Parameters

Use these values for preliminary battery pack, inverter and current matching before final technical confirmation.

LiFePO4 / NCM
Battery Chemistry
48V
Nominal Voltage
16S LFP / 14S NCM
Battery Configuration
200A
Rated Current
Bluetooth
Monitoring
ParameterSpecification
ModelB-48200-A
BMS VersionBMS 3.0 Type A
Nominal System Voltage48V
Battery ChemistryLiFePO4 / NCM
LFP Configuration16S Typical
NCM Configuration14S Typical
Working Voltage Range40V – 59V
Charge Voltage Range48V – 60V
Typical Charge Voltage54V
Rated Charge / Discharge Current200A
Maximum Charge / Discharge Current210A
Current Limitation10A
CommunicationCAN / RS485 ×2
MonitoringBluetooth
BalancingPassive Balancing
SOC CalculationSupported
Active Balancer ControlDry Contact Supported
Internal Resistance< 2mΩ
Working Temperature-20°C – 70°C
Storage Temperature-40°C – 85°C
Ambient Humidity10% – 85%
COMPATIBILITY & APPLICATION

Confirm Battery and System Compatibility Before Ordering

Check battery chemistry, series configuration, current requirements and communication compatibility before confirming your BMS selection.

Designed for Flexible Battery System Integration

Use the core product data below as a quick matching reference. Final compatibility should be confirmed against your battery pack and inverter requirements.

BATTERY CHEMISTRY

LiFePO4 / NCM

COMMUNICATION

CAN / RS485

MONITORING

Bluetooth

Rated Current

200A

DIY Battery Pack
Solar Energy Storage
Home Energy Storage
Battery System Integration
BEFORE ORDERING

Prepare These System Details

Need Help Selecting the Right BMS?

Share your battery chemistry, series configuration, nominal voltage, maximum current and inverter model. Our technical team can help confirm BMS compatibility before ordering.

Your project information will only be used to evaluate your inquiry and provide relevant product or technical support.