The Seplos B-48200-B BMS 3.0 Type B is designed for 48V battery packs requiring up to 200A typical charge and discharge current. It supports 16S LiFePO4 and 14S NCM battery configurations, making it suitable for different lithium battery architectures used in residential and solar energy storage systems.
The Type B design integrates communication interfaces into the main BMS board while using a separate status indicator module. Accurate SOC calculation, independent chip sampling, passive balancing, current limiting and Bluetooth monitoring help improve battery safety, pack consistency and system visibility.
Comprehensive Battery Protection
Intelligent protection helps manage high-current battery operation while supporting stable and reliable 48V lithium battery systems.
Smart Battery Monitoring
Bluetooth monitoring and accurate SOC calculation provide convenient access to battery operating status and remaining capacity.
CAN & RS485 Communication
Dual CAN/RS485 inverter communication interfaces support integration with compatible inverters and energy storage controls.
Cell Balancing Support
Passive balancing helps maintain cell consistency, while the built-in dry contact can activate a compatible external active balancer when required.
Review the key electrical, environmental and communication parameters before confirming battery configuration and system compatibility.
Use these values for preliminary battery pack, inverter and current matching before final technical confirmation.
| Parameter | Specification |
|---|---|
| Model | B-48200-B |
| BMS Version | BMS 3.0 Type B |
| Nominal System Voltage | 48V |
| Battery Chemistry | LiFePO4 / NCM |
| LFP Configuration | 16S Typical |
| NCM Configuration | 14S Typical |
| Working Voltage Range | 40V – 59V |
| Charge Voltage Range | 48V – 60V |
| Typical Charge Voltage | 54V |
| Rated Charge / Discharge Current | 200A |
| Maximum Charge / Discharge Current | 210A |
| Current Limiting | 10A |
| Communication | CAN / RS485 ×2 |
| Monitoring | Bluetooth |
| Balancing | Passive Balancing |
| SOC Calculation | Supported |
| Active Balancer Control | Dry Contact Supported |
| Working Temperature | -20°C – 70°C |
| Storage Temperature | -40°C – 85°C |
| Ambient Humidity | 10% – 85% |
Check battery chemistry, series configuration, current requirements and communication compatibility before confirming your BMS selection.
Use the core product data below as a quick matching reference. Final compatibility should be confirmed against your battery pack and inverter requirements.
Share your battery chemistry, series configuration, nominal voltage, maximum current and inverter model. Our technical team can help confirm BMS compatibility before ordering.
Your project information will only be used to evaluate your inquiry and provide relevant product or technical support.