10 Key Features of Seplos BMS 3.0: Superior Battery Management System

BMS 3.0 is an integrated circuit with separate power supply chips.
Request charging voltage, charging and discharging current have independent parameter Settings. It’s super easy to use.
BMS 3.0 is collected by a single chip and fed back to MCU. It won’t cause any temperature drift current and deviation of SOC in hot conditions.
It is integrated with heating and trip-dry contacts. They can operate at the same time.
You can set up the communication protocol on the LCD screen.
It can be equipped with a touch screen. Both 3.3v and 5v LCD screens are available.
It’ll monitor the data of each battery pack via the upper computer while a couple of packs are in parallel.
BMS 3.0 uses the MODBUS-RTU communication protocol to request corresponding data independently. MODBUS-RTU allows software or test engineers to parse the BMS protocol effortlessly.
Optimize the one-click shutdown function. After the shutdown command is sent, the charge and discharge tubes switch off and the current can’t flow back. BMS will turn off automatically.
The active balancer can be controlled to activate the balancing function when the alarm of the unit voltage deviation triggers, the BMS sends signals to turn on the balancer.