The best quality products are for you to choose from

English

news

Home /News/

China Shenzhen Seplos Technology Co.,Ltd company news

Events

News
Cases

All Products

SEPLOS DISTRIBUTOR PROGRAM

2022-06-29 20:26:07

SEPLOS DISTRIBUTOR PROGRAM
MASON-280 51.2V 280Ah Battery Pack Assembling Guide

2022-06-24 10:02:02

Step 1. Handle and Hasps Installation Material: 1 battery pack box and 4 concealed handles Tool: electric screwdriver and hexagonal nuts H2.5 Thread the M4 countersunk nuts with the hex H2.5 to the box sink, with the concealed handles’ folding side facing downward. Set the torque index of the ...
Connect terminal plug into terminal socket

2022-06-02 18:40:27

The socket is turnable. Rotate the front part of the socket at the proper position according to the direction of wiring before connection. Align the arrows on the plug and socket as shown in the picture. 3. Push the plug into the socket. With a cluster comes out, the terminals are connected. Do not ...
Battery Terminals Assembly

2022-06-02 18:35:00

1. Get the parts (the terminals, wire, and heat shrink) ready. 2. Screw out the protective tube as shown in the picture. 3. Slide the heat shrink tube and protective tube onto the wire. 4. Strip the insulating layer of the wire 11.5±0.5mm. 5. Crimp the terminals according to the referenced size in ...
SEPLOS 3.2V 135AH Lithium Iron Phosphate Cell Module Test Report

2022-05-13 20:26:46

Over Discharging Test After fully charging the 3.2V 135Ah battery module, discharge it at 1I1 for 90 minutes and observe for 1 hour. There should be no explosion, fire, or leakage. Test results: no explosion, fire, or leakage. Over Charging Test After fully charging the 3.2v 135ah battery module, ...
SEPLOS 3.2V 135Ah LiFePO4 Battery Pack Test Report

2022-05-13 09:15:23

Over Discharging Test Full Charge the cell battery. And discharge it at 1I1 for 90min, and observe for 1 hour that there should be no explosion, no fire, and no leakage. Test results: no explosion, no fire, and no leakage. Over Charging Test Charge the cell battery, and discharge it at 1I1 until the ...
Distributor Wanted - SEPLOS Home Energy Storage System

2020-09-21 14:58:14

How to be a SEPLOS regional wholesale distribution? Seplos Technology is dedicated to the development of renewable energy storage systems for residential and commercial application. We're looking for distributors all around the world for the wholesale of our home energy storage system. Seplos energy ...
How to Distinguish Grade A and Grade B cell - Prismatic Cell

2019-12-10 21:10:27

According to an analysis, China shares 73% of global lithium cell manufacturing capacity. Therefore, to know the Chinese battery market is a critical part for those who enrolled in this industry. There are many factories producing LiFePO4 battery cells in China. And the quality standards are ...
Cheap Battery Part 1 - Grade A VS Grade B? What is the Grade B lithium ion battery cells?

2019-11-21 16:32:12

Many clients are confused by the quality standard of lithium-ion battery cells. Some claimed that they are grade A, grade B. And what is the standard? How the manufactures define each level? Today, we're going to share with you something about the quality grades. Quality grades: Grade A: All ...
Seplos 3.2V 135Ah Lithium Ferro Phosphate Battery Cell Quality Control

2022-05-19 15:11:27

Appearance Inspection Check the battery cell appearance. There should be no deformation or cracks in appearance and the surface should be flat, dry, free from damage or dirt, etc., and should have clear and correct signs. or cracks in appearance and the surface should be flat, dry, free from damage ...

1 2

Shenzhen Seplos Technology Co.,Ltd

About

Company Profile Factory Tour Quality Control Contact Us

News Cases Sitemap Privacy Policy

Products

Seplos LiFePO4 Battery Pack

Seplos LiFePO4 Prismatic Cell

Seplos Smart BMS

All Categories

China Seplos LiFePO4 Battery Pack Supplier. Copyright © 2019 - 2022 seplos.com. All Rights Reserved. Developed by ECER

info@seplos.com

+86 15079804024